Setting Up SOS Contacts for Lone Workers
When someone works alone, whether on a remote farm, in a city office after hours, or on a construction site, the ability to call for help quickly can make a critical difference. A personal duress alarm is one way to provide that safety net, but the device itself is only part of the system. The SOS contacts you set up determine who gets notified, how they respond, and whether help arrives in time. This article walks through the steps to configure those contacts properly, so the system works when it matters most.
Step 1: Choose the Right Contacts for the Situation
The first step is deciding who will receive an alert when you press the SOS button or when the device detects a fall or man-down situation. Not every contact is suitable for every scenario. For example, a family member might be ideal for a late-night office worker but less helpful for someone on a remote worksite where they cannot reach the person quickly.
Think about the nature of the work and the location. If the lone worker is in a building with a security desk, the desk should be one of the contacts. If the worker is in a rural area, a neighbour or a local emergency responder might be a better choice. The key is to select people who are likely to be available, nearby, and able to take action. Avoid contacts who might be on leave, in meetings, or in a different time zone when the alarm could be triggered.
Step 2: Gather Reliable Contact Details
Once you have a list of potential contacts, collect their phone numbers and any other relevant information. For a personal duress alarm, the most common method is a phone call or a text message. Check that each number is correct and that the contact is reachable at that number during the times the worker is alone.

Watch for common issues: landlines that go to voicemail after a few rings, mobile numbers that are often switched off, or contacts who have changed numbers without telling you. It is wise to test each number by having the system send a test alert before the worker starts their shift. If the contact does not receive the test message, find a different number or a different person.
Step 3: Set Up a Chain of Contacts
A single point of failure is dangerous in any safety system. If the first contact does not answer, the alert should move to a second person, and then to a third. Most lone worker alarms allow you to configure this escalation sequence. The first contact might be a supervisor, the second a colleague, and the third a local emergency service.
Think about the timing between each attempt. If the first contact does not respond within a few minutes, the system should automatically try the next one. Setting the interval too short can cause unnecessary alarms; setting it too long can delay help. A common approach is to allow one to two minutes for each contact, depending on the situation. For high-risk work, such as work near heavy machinery or in extreme temperatures, shorter intervals are better.
Step 4: Test the System Regularly
Setting up contacts is not a one-time task. People change jobs, lose phones, or go on holiday. Test the entire alert chain at least once a month. Press the SOS button or trigger a simulated fall, then watch what happens. Does the first contact receive the alert? Do they know what to do? If they do not answer, does the system move to the next contact?
Keep a log of these tests. Note any failures and fix them before the next shift. Also check that the device itself is working: is the battery charged, is the GPS signal strong, and is the two-way voice communication feature functioning? A device like the Mercari Lone Worker Alarm NZ lone worker alarm includes these features, but they need to be verified regularly to be useful in an emergency.

Step 5: Brief Each Contact on Their Role
Being an SOS contact is more than just receiving a notification. Each person should know what to do when they get the alert. Should they call the worker back first? Should they go to the worker's location? Should they contact emergency services immediately? Write down clear instructions for each contact and review them together.
Watch for confusion about who is responsible at each step. If the first contact is supposed to call the worker but cannot reach them, what do they do next? The contact needs to know the escalation plan and their place in it. This is especially important if the contact is a family member who might panic. Keep the instructions simple and practical: "If you receive this alert, call the worker. If they do not answer within two minutes, call emergency services."
Step 6: Consider the Working Environment
The environment where the lone worker operates affects how the SOS system should be configured. Indoors, a personal duress alarm with strong two-way voice communication can help the contact assess the situation before deciding what to do. Outdoors, GPS location is essential so the contact knows exactly where to send help.
If the worker moves between different sites, the contacts might need to change for each location. For example, a worker who visits multiple farms might have a different local contact for each farm. Some lone worker alarms allow you to store multiple contact groups and switch between them easily. Think about how the worker will update their contacts when they move to a new area. A simple checklist at the start of each shift can prevent mistakes.
Step 7: Review and Update the Contact List
People's availability changes. A contact who was perfect six months ago might now be on extended leave or have a new role that keeps them busy. Set a reminder to review the contact list every three months. Ask each contact if they still want to be on the list and if their details are still correct.

Also review the system itself. If the company has acquired new technology, such as a Mercari Lone Worker Alarm NZ lone worker alarm with fall detection and man-down alerts, the contact setup might need to be updated to take advantage of those features. For instance, fall detection might trigger a different type of alert than a manual SOS press, and the contacts for each type might be different.
Setting up SOS contacts for a lone worker is not complicated, but it requires thought and regular maintenance. The goal is to make sure that when an alarm goes off, the right person receives it quickly and knows exactly what to do. By choosing the right people, testing the system, and keeping everything up to date, you create a safety net that works reliably. A personal duress alarm is only as good as the people who respond to it. Take the time to set it up properly, and review it often. That small effort can make a big difference when it matters most.
Mercari Lone Worker Alarm NZ on social media
YouTube